The problem of rust is something every homeowner and business owner can have issues with. Rust is essentially iron that’s been broken down by iron oxide. This essentially corrodes metals causing them to wear and break down.
However, removing rust from metal doesn’t have to be a permanent or costly problem. Luckily, there are numerous ways that you can try to fix and rid your metal objects of rust.
Here’s a quick guide on how to remove rust from metal. Read on!
Natural Solutions for Rust Removal
Natural solutions for rust removal are a safe, cost-effective option for getting rust off metal surfaces. Common ingredients found in your pantries, such as white vinegar, salt, and baking soda make a DIY rust remover that is both effective and affordable.
To use, mix a solution of equal parts vinegar and water in a spray bottle and apply the solution liberally to the rusty surface.
Let the mixture sit for an hour before scrubbing the surface with salt and a sponge. Then, rinse off the surface to remove the vinegar mixture, and repeat if necessary. For stubborn rust spots, make a paste of baking soda and water and apply it to the rust.
Let the paste sit for several hours then scrub the surface with baking soda. Finally, rinse the surface with water and dry thoroughly. Natural solutions for rust removal are a convenient, non-toxic way to remove rust from metal.
Chemical Solutions
One way to remove rust from metal is through chemical solutions. Start by using a wire brush to scrape off as much flaky rust as possible before applying a chemical solution that safely converts the rust.
Submerge the metal in this solution for a few minutes, then rinse with clean water. This solution should help turn the rust into black sludge that can be removed with a toothbrush or scouring pad.
When it’s all removed from the metal, rinse it with a hose or bucket of water and dry it completely. Additional chemical solutions may be necessary if the rust has corroded deeply into the metal.
Once the rust has been removed, protect the metal from further corrosion by applying a paint or wax seal coat to restore the metal’s sheen and protect against further rust.
With Power Tools
Start by sanding the rust down with an angle grinder and coarse sandpaper. This will help break down the rust into smaller pieces, allowing it to be more easily removed.
If the rust is deeply entrenched, you can use a wire cup brush to get into those hard-to-reach spots before the sanding process.
After the rust has been reduced, use a hand-held electric sander along with a finer grain of sandpaper to polish the object and bring out a smooth finish.
Use a blow dryer or heat gun to finish the job. When you’re done, clean off the surface with a damp cloth and then rinse off in clean water, and your object should be rust-free.
But if you find removing rust a daunting task, purchase new steels here: Bushwickmetals.com
Learn How to Remove Rust From Metal Today
If you want to know how to remove rust from metal, it can be an arduous job, but the techniques discussed above can help make it easier. With the right supplies, some time, and effort, any rusted metal can be restored to its former glory.
If following these steps doesn’t work, it may be necessary to enlist the help of a professional rust-removal company. Try these techniques and you’ll be pleasantly surprised with the results.