To get the most value out of your carpets – and your flooring – you want to make sure they stay clean. You don’t need to scrub your carpets yourself every few weeks to keep them clean, though.
You just need to know what’s lurking in your carpets and how to get those tough stains out of them. There are all kinds of stains on the carpet – and some of them are tougher to get out than others.
Here are ten of the toughest stains you need to know about if you want your carpets out of your house to stay clean. Read on!
1. Red Wine
Red wine is notorious for leaving stubborn stains on carpets. The key to removing red wine stains is to act quickly. Blot as much of the liquid as possible before it has a chance to set in.
Mix a solution of one part white vinegar to one part water and apply it to the stain. Blot the stain with a clean cloth and repeat until the stain is gone.
Additionally, try using a mixture of baking soda and water to form a paste and apply it to the stain. Allow it to sit for a few minutes before blotting it with a clean cloth.
2. Blood
Blood stains can be particularly difficult to remove because blood contains proteins that can bond to carpet fibers.
To remove blood stains, mix a solution of one part cold water with one part hydrogen peroxide. Then apply it to the stain. Blot the stain with a clean cloth and repeat until the stain is gone.
An alternative method is to mix a solution of one part dish soap with three parts cold water. Apply it to the stain, then blot it with a clean cloth.
3. Coffee
Coffee stains can be hard to remove because of the high levels of caffeine and tannins in coffee.
To remove coffee stains, mix a solution of one part white vinegar with one part water and apply it to the stain. Blot the stain with a clean cloth and repeat until the stain is gone.
If this method doesn’t work, try mixing a solution of one part baking soda with one part water. Apply it to the stain, then let it sit for a few minutes before blotting it with a clean cloth.
4. Grease and Oil
Grease and oil stains are difficult to remove because they are not water-soluble.
To remove grease and oil stains, mix a solution of one part dish soap with one part warm water and apply it to the stain. Blot the stain with a clean cloth and repeat until the stain is gone.
Another method that may work is to place a few drops of dish soap directly on the stain. Cover it with a mixture of cornstarch and baking soda, then let it sit for a few minutes before vacuuming it up.
5. Ink
Ink stains penetrate deep into carpet fibers. To remove ink stains, mix a solution of one part rubbing alcohol with one part water and apply it to the stain. Blot the stain with a clean cloth and repeat until the stain is gone.
An alternative method is to mix a solution of one part white vinegar with one part water. Apply it to the stain, then blot it with a clean cloth.
6. Mud
Mud stains contain a mixture of dirt, clay, and other particles that can bond to carpet fibers.
To remove mud stains, use a dry cloth to blot up as much of the mud as possible. Mix a solution of one part white vinegar to one part water and apply it to the stain. Blot the stain with a clean cloth and repeat until the stain is gone.
7. Pet Urine
Pet urine stains contain enzymes that can bond to carpet fibers. To remove pet urine stains, mix a solution of one part white vinegar with one part water and apply it to the stain. Blot the stain with a clean cloth and repeat until the stain is gone.
Another method is to use an enzymatic cleaner specifically designed for pet urine. This can break down the enzymes and remove the stain.
It’s important to note that it is crucial to completely clean the area and neutralize the odor. Otherwise, your pet may be attracted to urinate in the same spot again.
You can also visit https://carpetcleaningchicagoccg.com/ for high-quality cleaning services!
8. Rust
Rust stains can penetrate deep into carpet fibers. To remove rust stains, mix a solution of one part lemon juice with one part salt and apply it to the stain. Blot the stain with a clean cloth and repeat until the stain is gone.
Also, you can mix a solution of one part white vinegar with one part water. Apply it to the stain, then blot it with a clean cloth.
9. Tar
Tar stains penetrate deep into carpet fibers and have a strong adhesive quality.
To remove tar stains, mix a solution of one part mineral spirits with one part white vinegar. Then, apply it to the stain. Blot the stain with a clean cloth and repeat until the stain is gone.
Another method that may work is to use a putty knife or credit card. Gently scrape off as much tar as possible before using the above solution.
10. Vomit
Vomit stains contain enzymes and bacteria that can bond to carpet fibers.
To remove vomit stains, mix a solution of one part white vinegar with one part water and apply it to the stain. Blot the stain with a clean cloth and repeat until the stain is gone.
You can also use a solution of one part baking soda to one part water and apply it to the stain. Let it sit for a few minutes before blotting it with a clean cloth.
Getting Out Stains in Carpet
Cleaning carpets can be hard, but don’t give up hope! There are a variety of methods to treat the toughest of stains in carpet. Use the right products and methods, and call in a professional if nothing else works.
Start tackling stubborn carpet stains today!
Visit our page to learn more tips and info!